-
ENPAC简介
...
-
PIERCAN简介
...
-
Justrite简介
...
-
HONEYWELL简介
...
-
Whatman简介
...
-
Brady简介
...
尖底离心管
-
累计销量0 累计评价0 - :可高压灭菌的尖底离心管
- :多种材质,15ml,35ml,50ml
- :美国品牌
- :1
- :部分型号常备现货
- :可高压灭菌的尖底离心管,有PPCO、PC等多种材质,有15ml、35ml、50ml等多种容量可供选择。带刻度。适合低速离心。
-
1、PPCO尖底离心管/ 敞口式离心管(本身不带盖子)
Nalgene 3103 PPCO Conical-Bottom Centrifuge Tubes
基本特点Features:
◆用途:适合低速离心,可用于速度达6000xg的冷冻和非冷冻离心机上。
Designed for low-speed centrifugation up to 6000 × g in refrigerated or non-refrigerated.
◆性能:半透明的PPCO具有极佳的耐化学性,适合大多数的实验室试剂。
Translucent Polypropylene Copolymer (PPCO) has excellent chemical resistance,is compatible with a wide range of lab reagents.
◆材质:PPCO聚丙烯共聚物。Polypropylene Copolymer (PPCO).
◆盖子:离心管本身不带盖子,但可以选购匹配的盖子。
Supplied without closure,But friction fit closures available. For 15mL use DS3111-0017; for 50mL use DS3111-0029.
◆刻度:标有塑印/模制刻度。简单的测量可用尖底离心管,因为尖底离心管上有模制的刻度。
Molded-in graduations last the life of the tube. Simplify measurements using Nalgene™ PPCO Conical-Bottom Centrifuge Tubes, which feature molded-in graduations.
◆优点:尖底离心管的沉淀物质被浓缩在一个很小的区域,便于隔离和提取。
Conical bottoms concentrate pellet in a small area for easy isolation and retrieval.
◆灭菌与使用寿命:在反复高压灭菌操作的情况下,比聚碳酸酯离心管寿命更长。
Last longer than polycarbonate tubes under conditions of repeated autoclaving.
◆关键特点:可高温高压灭菌,有刻度. Tube are both autoclavable and graduated.
◆注意:离心时必须至少填满80%离心管的量.Must be filled to at least 80% of the total capacity.
型号选择Ordering Information:
订货号NG |
标称容量 |
直径×全长mm |
选配盖子型号 |
包装数量 |
NG3103-0015 |
15 mℓ |
16.8 x 118.6 |
DS3111-0017 |
10个/盒,100个/箱 |
NG3103-0050 |
50 mℓ* |
28.7 x 133.1 |
DS3111-0029 |
10个/盒,100个/箱 |
2、PC尖底离心管/ 敞口式离心管/高度透明离心管/全细胞分离离心管(本身不带盖子)
Nalgene 3105 PC Conical-Bottom Centrifuge Tubes
基本特点Features:
◆用途:适合低速离心,可用于速度达6000xg的冷冻或非冷冻离心机上。
Designed for low-speed centrifugation up to 6000 × g in refrigerated or non-refrigerated.
◆材质:聚碳酸酯。polycarbonate (PC).
◆性能:透明的PC具有极佳的机械强度,是进行全细胞分离的理想选择。
Perform who cell separations with the help of Nalgene™ PC Conical-Bottom Centrifuge Tubes, which feature outstanding mechanical strength and clarity.
◆透明度:极度透明,适合清楚地观察管内物质。Excellent clarity for viewing tube contents.
◆盖子:离心管本身不带盖子,但可以选购匹配的盖子。
Supplied without closure,But friction fit closures available. For 15mL use DS3111-0017; for 50mL use DS3111-0029.
◆刻度:标有永久性的塑印/模制刻度。简单的测量可用尖底离心管,因为尖底离心管上有模制的刻度。
Molded-in graduations last the life of the tube. Simplify measurements using Nalgene™ PC Conical-Bottom Centrifuge Tubes, which feature molded-in graduations.
◆优点:尖底离心管的沉淀物质被浓缩在一个很小的区域,便于隔离和提取。
Conical bottoms concentrate pellet in a small area for easy isolation and retrieval.
◆灭菌与使用寿命:在反复高压灭菌操作的情况下,聚碳酸酯离心管的寿命会缩短。
Autoclaving repeatedly will shorten the life of polycarbonate tubes.
◆关键特点:可高温高压灭菌,透明,有刻度。 Autoclavable/Graduated/Transparent.
◆注意:离心时必须至少填满80%离心管的量。Must be filled to at least 80% of the total capacity.
型号选择Ordering Information:
订货号NG |
标称容量 |
直径×全长mm |
选配盖子型号 |
包装数量 |
15 mℓ |
17.0 x 120.1 |
DS3111-0017 |
10个/盒,100个/箱 |
|
NG3105-0050 |
50 mℓ |
28.7 x 134.1 |
DS3111-0029 |
10个/盒,100个/箱 |
3、PC尖底离心管/ Oak Ridge尖底离心管/可高温高压灭菌的尖底离心管
Nalgene 3146 PC Conical-Bottom Centrifuge Tubes
基本特点Features:
◆特色:同时具备优秀的分离/粒化能力和出色的密封性能。
◆材质:聚碳酸酯管身,聚丙烯螺旋盖。
◆性能:透明的PC具有极佳的机械强度,是进行全细胞分离的理想选择。
◆透明度:极度透明,适合清楚地观察管内物质。
◆盖子:离心管本身不带盖子,但可以选购匹配的Nalgene密封盖(货号为DS3132-0024),但需要尖底管接头(货号为DS3147-0050)。
◆刻度:丝印刻度,从5ml到35ml,最小刻度为1ml。
◆优点:尖底离心管的沉淀物质被浓缩在很小的区域,便于隔离和提取。
Conical bottoms concentrate pellet in a small area for easy isolation and retrieval.
◆灭菌操作:在进行高温高压灭菌操作之前,将盖子放置在离心管上,但不要按螺纹旋转密封。
Before autoclaving, just set closure on top of the tube without engaging the threads.
◆灭菌与使用寿命:在反复高压灭菌操作的情况下,聚碳酸酯离心管的寿命会缩短。
Autoclaving repeatedly will shorten the life of polycarbonate tubes.
◆关键特点:可高温高压灭菌,生物危害,透明,有刻度,防漏。 Autoclavable/Graduated/Transparent.
◆注意:离心时必须至少填满80%离心管的量。Must be filled to at least 80% of the total capacity.
型号选择Ordering Information:
订货号NG |
标称容量 |
包装数量 |
选配盖子型号 |
选配尖底管接头型号 |
NG3146-0050 |
35mℓ |
10个/盒,100个/箱 |
DS3132-0024 |
DS3147-0050 |