-
ENPAC简介
...
-
PIERCAN简介
...
-
Justrite简介
...
-
HONEYWELL简介
...
-
Whatman简介
...
-
Brady简介
...
离心管 氟塑料
-
累计销量0 累计评价0 - :氟塑料离心管
- :多种型号
- :进口品牌
- :1
- :部分型号常备库存
- :氟塑料离心管,是高速离心处理腐蚀性化学品的理想选择,尤其适合用冷冻离心机在50000xg离心速度下萃取氯仿和苯酚。
-
特氟龙圆底离心管/ 氟塑料离心管/Teflon*FEP离心管
Nalgene 3114 Oak RidgeHigh-Speed Centrifuge Tubes
基本特点Features:
◆用途与离心速度:可用于高达50,000 XG的冷冻和非冷冻离心机上。
Can be used up to 50,000 x g in refrigerated and non-refrigerated centrifuges.
◆用途与性能:是高速离心处理腐蚀性化学品的理想选择,尤其适合用冷冻离心机在50000xg离心速度下萃取氯仿和苯酚。对于所有的酸、碱、溶剂和活泼的化学药品具有极佳的化学耐受性。Conduct high-speed centrifugation of aggressive chemicals, specifically suited for chloroform and phenol extractions in refrigerated machines up to 50,000 x g.Excellent for chloroform and phenol extractions. Resist any acid, base or solvent, aggressive chemicals.
◆材质:特氟隆管体,特氟隆螺旋盖。Materials: Teflon* FEP,Tefzel* ETFE Screw Closure.
◆圆底离心管:适合高速离心机。Round bottom to fit high speed rotors.
◆Oak Ridge 离心管:Nalgene Oak Ridge 离心管标配(随附)无衬垫的聚丙烯螺旋盖,容易清洗,并能保证在10000 x g 的离心速度下防漏。Comes with polypropylene linerless closures—easy to clean and provides leak proof protection under normal conditions up to 10,000 x g.
◆螺旋盖:标配普通螺旋盖,当高速离心时为了确保防漏,部分型号有密封螺旋盖供选配(货号DS3131)。
Tefzel ETFE screw caps. Leakproof† Tefzel™ ETFE closures prevent material loss under ordinary use for most spins <10,000 × g.NALGENE Additional sealing cap assemblies (Cat. No. DS3131 series) are available. Optional sealing caps available — DS3131-0020 (for 30mL tube) and DS3131-0024 (for 50mL tube).
◆密封盖的选择:为确保防漏,当离心速度高于10000xg或者对有害物质进行离心时,本系列30ml和50ml的离心管通常使用密封盖或者密封盖装置(可另购)。
Sealing caps available for 30mL and 50mL size to assure leakproof service especially at high speeds >10,000 × g or when spinning hazardous materials(sold separately).
◆适用温度:Withstand temperatures from -100° to +150°C (-148° to +302°F).
◆配套转子:几乎对应贝克曼、久保田、日立、TOMY等所有离心机的转子。
◆符合标准:符合美国OSHA血清抗病原体标准。
◆灭菌操作:在进行高温高压灭菌操作之前,将盖子放置在离心管上,但不要按螺纹旋转密封。
Before autoclaving, just set closure on top of the tube without engaging the threads.
◆预测试:在20000RCF以上使用时,一定要预先测试离心管。
◆关键特点:可高温高压灭菌,防生物危害,防漏,氟塑料. Autoclavable/Biohazard/Leakproof/PTFE FEP.
◆注意:离心时必须100%填满离心管的量.Must be filled to at least 100% of the total capacity.
型号选择Ordering Information:
订货号NG |
标称容量 |
直径×全长mm |
选配密封盖型号 |
包装数量 |
10 mℓ |
φ16×80 |
/ |
2个/盒,10个/箱 |
|
NG3114-0030 |
30 mℓ |
φ25.5×92 |
DS3131-0020 |
2个/盒,10个/箱 |
NG3114-0050 |
50 mℓ* |
φ28.5×104 |
DS3131-0024 |
2个/盒,10个/箱 |
备注: 订货号为NG3114-0050离心管实际满装容量为42ml,为标准离心机而设计。Order No. NG3114-0050 has a brim capacity of only 42mL but is designed to fit standard rotor.